flexible chain conveyor for cans

flexlink chain conveyor

What Is The Features Of The Flexible Conveyor? (1)

The flexible conveyor is similar to our ordinary roller, mesh beltand belt conveyor. It also has its own flexible screw machine, flexible hoist, flexible gripper and other conveying forms.

The power source of the flexible conveying series products usually comes from the motor that drives the head end. The flexible equipment will have much less sound than the ordinary conveying equipment during the conveying process. Because the flexible series products are rich and varied, they are easy to install, can be transported in a straight line, and can also be turned and conveyed. Flexible for environments that many other devices cannot adapt to.

Of course, it is low in operating cost and convenient to install and maintain. It is also a highly flexible and controllable device, and is one of the important reasons why most buyers prefer it.

For the first time, the flexible equipmentshould be fixed according to its operating environment. After the commissioning operation is confirmed, it will be put into use after normal operation. (The flexible equipment usually has rigid requirements before leaving the factory: four hours of uninterrupted operation, observe whether the motor, chain plate, etc. meet Standard) flexible conveyor line can not transport gas, powder products, as for bottled, boxed, bagged, there is no problem at all, even in the case of holding equipment, flexibility will be superior to ordinary conveyor

How To Choose The Chain Conveyor?

The chain conveyor has flexible conveying mode, large bearing capacity, long service life and conveying various shapes of materials. It consists of driving tensioning device, chain plate body and electric control system. Widely used in various industries such as electronic products, food, home appliances, beverages, automobiles and medical care. When selecting the chain conveyor line, we must consider many factors and determine some main parameters, so that manufacturers can design according to the actual needs of customers. Chain plate line.

According to the type of conveying product selection: according to the actual situation of the factory, which type of chain conveyor is used. If it is a large electromechanical industry such as automobile, motorcycle, home appliance (television, washing machine, refrigerator), it is necessary to choose heavy chain. Plate conveyor, if it is food, beverage, electronics, electrical appliances, etc., choose alight chain line.

Determine the conveying direction: According to different conveying directions, you can choose linear chain conveyor, climbing chain conveyor, turning chain conveyor, working desktop chain conveyor, vertical chain conveyor, curved chain conveyor, Accumulate chain conveyors, etc.

Determine the basic parameters of the line body: such as width, height, pitch, length, conveying speed, load bearing ofthe conveyor, etc. Only normal width, height and length can guarantee safe transportation. The chain conveyor has a width of 500 mm to 1800 mm, a height of <1500 mm, and a length of <30000 mm.

Details: If the requirements of the material of the chain plate, in general, the material of the chain plate is PP (polypropylene), PE (polyethylene), ACETAL (acetal). NYLON (nylon), stainless steel, etc. There is also a requirement for the material of the chain conveyor frame. Under normal circumstances, the material of the frame is high-strength aluminum alloy profile, carbon steel plate bending, carbon steel channel steel, stainless steel.

Optional parts: If you need a tooling board, fixtures, etc. In short, the chain conveyor has low cost, simple structure, high conveying speed, stable performance, easy installation and maintenance, and is the first choice for small and medium-sized enterprise assembly lines.

The chain conveyor should be matched with the main equipment, but also suitable for personnel walking, product transportation, and beautiful scenery. Therefore, when designing the chain conveyor, it must be measured on site, and the chain conveyor should be designed according to the equipment layout and environment. .

Guangzhou Hongjiang Automation Equipment Co., Ltd. Employees Actively Participated In Blood Donation Activities

This morning we learned from our supplier, Guangzhou Baisen Plastic Products Co., Ltd. that the son of an employee of their company had acute leukemia and needed blood donation.

 The patient has just returned from studying in the United States, and sudden acute leukemia requires a lot of blood. Hu Xiji, the boss of the company, immediately organized the company's employees to carry out voluntary blood donation activities. All employees in guangzhou hongjiang actively participated in the blood donation, and explained the spirit of caring for society and selfless dedication with practical actions, conveying love and strength. Then our company boss Hu Xiji rushed to the hospital where the patient is now treating, visiting patients with acute leukemia in the ward, and encouraged him to actively fight against the disease.

Health and well-being can be shared, love can be passed on, and donate blood to help others today. In fact, it is also helping the future self. Blood donation is a benefit to others. Only 50 people need to donate blood, the hospital can give blood treatment for a long time, and now there are a few places, I hope to get everyone's love support, the blood donation car is waiting at the company.

Give a drop of blood and give a love. As long as you enter your own strength, love will be filled with human beings, and where the flowers of love bloom, life can flourish.

Magnetic Belt Conveyor For Empty Cans--made by Guangzhou Hongjiang company

What Are The Material Delivery Methods? What Is The Main Danger?

The main conveying methods of materials are:

Belt conveyor, chain scraper conveyor, screw conveyor,bucket conveyor, etc.;

There is basically no danger in this, but the characteristics are different and have their own defects:

Disadvantages of belt conveyor

1, occupy a large area,

2, the investment is big,

3, inconvenient maintenance, need to loose the belt, the amount of work is large.

Disadvantages of the scraper conveyor:

1. The no-load power consumption is large, about 30% of the total power.

2, easy to occur chain, jump chain accidents.

3, consume more steel. Cost is large.

Disadvantages of screw conveyors:

1. The friction between the blade, the casing and the material is relatively large, so that the blade and the casing are prone to wear and the power consumption is relatively large.

2, the transport distance is limited, can not exceed the maximum regulations.

3, suitable for small conveying, short distance material conveying.

4. The screw feeder can reach the material conveying less than 90 degrees.

Disadvantages of the bucket elevator:

1. The type of material to be transported is limited;

2. The sensitivity of the overload is large and must be uniformly fed.

FAQ - What is the difference between PU food conveyor belt and PVC conveyor belt?

# pu food conveyor  #PVC conveyor #food grade conveyor  #PVC belt #PU belt



FAQ - What is the difference between PU food conveyor belt and PVC conveyor belt?: FAQ - What is the difference between PU food conveyor belt and PVC conveyor belt?